Description

BIQU Hurakan 3D Printer, Klipper Firmware, Auto Leveling, Built-in Microprobe, Partitioned Hotbed, Silent Printing, Filament Runout Sensor, WiFi Remote Control
BTT Manta M4P CB1
The Manta M4P control board and the CB1 core both are of the latest design which enables Hurakan to run Klipper while also supporting Marlin.
Klipper is Ready
Klipper (an improvement in 3D Printer firmware) has been pre-installed on the Hurakan, allowing you to leave out complicated installation procedures while enjoying speed, precision, and convenience.
Built-in WiFi Module
The built-in WiFi module makes it easier for users to print, pause, check printing progress, and adjust various printing parameters using the mainsail interface. Ensure that the control device and printer are connected to the same WiFi network.
BIQU MicroProbe, Auto Leveling
The self-developed auto-leveling sensor is tiny and lightweight at only 6g. It can be used over 10 million times while maintaining a high precision leveling capability.
Quiet 3D Printing
The Harakan uses an ultra-silent motor driver IC known as TMC2209 which significantly reduces printing noise.
Choose the Part to Heat
Adjust the heated area of the bed with a simple flick of a switch. Save energy and help protect the environment. 100W is for the central part of the bed (red light on). 240W is for the whole bed (both blue and red lights on).
Filament Runout Sensor
The filament runout sensor allows the printer to automatically pause a print if the filament runs out or breaks, therefore saving time and filament.
Venting Grille
The venting grilles situated on the base and print head add to the printer’s unique look while serving the practical function of improving heat dissipation efficiency and reducing weight.
Light up Your Prints
An RBG light is fully customizable and beautifully designed to illuminate your prints in the dark, providing a full, 16.8M color control via the web interface or display screen.
Specification:
General
Type: 3D Printer
Model: Hurakan
Color: Black Blue
Specification
Build Volume: 220x220x270mm
Layer Thickness: 0.1mm-0.3mm
Printing Accuracy: ±0.05mm
File Format: G-code
Printing Method: USB Drive/LAN Controlled
Rated Power: 280W
Rated Voltage: 100-120V/200-240V, 50/60 Hz
Max Temperature of Heated Bed: 100℃
Default Speed Limit (Firmware): 180mm/s
Filament Runout Detection: Standard Feature
Print Head: 1 PC
Nozzle Diameter: Standard 0.4mm
Firmware: Klipper
Heated Bed Power: 100W/240W
Output Voltage: 24V
Maximum Temperature of Nozzle: 260℃
Suggested Printing Speed: 60mm/s
Slicing Software Compatibility: Cura/Repetier-Host/Simplify 3D, etc.
Filament: PLA/ABS/PETG…(Any material with print temp lower than 260℃, including flexible filament with 95A stillness.)
Weight & Size
Product Weight: 8.5kg
Package Weight: 11kg
Product Size(L x W x H): 48*47*48.2cm
Package Size(L x W x H): 54*42*26cm
Package Contents
1 x 3D Printer
1 x Bowden Tube Connector
1 x Nozzle
1 x BTT Duck
1 x Set of Tools
1 x Screw Accessories
1 x Power Cord
1 x TF Card Card Reader
10 x Cable Ties
1 x 50g Filament for Test
1 x User Manual